Vehicles
Sections
399 not categorized PORSCHE 987 ENDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1960-65 (includes uncategorized and accessory items) 911606105JXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83
$744.70
Make a selection 91134732204EQ The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and proactively change them when noticing any of the symptoms. Quality European aftermarket replacement designed to perform like the original. Sold individually. Left or right-side fitment. 2 necessary per car.
$64.90
Make a selection 911606105HXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car.
$744.70
Make a selection BT4000 Never worry about a dead battery while your car is in storage or you’re away as long as you have the battery tender. This handy device will monitor your battery’s voltage constantly. Don’t worry about over charging, the tender automatically goes into a floating mode once your battery is fully charged. This great item will increase the life of your battery. General FitmentACCESSORY
$69.95
Make a selection 914503032F Excellent repair panel for this area of the front 914 fender
$41.87
Make a selection 914503031F Excellent repair panel for the front of your rusted or crashed 914 fender
$41.87
Make a selection 914503032G Excellent panel to repair the front fender front dog leg area under the side marker
$75.00
Make a selection 92833226701 This is a high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per axle.
From $6.60
Make a selection 914102RH This valence has a very small forward lip and an air intake.
$200.00
Make a selection 94460617001 For all 944 and 944s2 models this is the device that signals the control unit to cause the coil to spark. when this device fails your car is dead in the water, there is fuel pressure but no spark.
$144.68
Make a selection 99134713100 High-quality lemforder OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. Left or right side fitment. 2 necessary per car.
From $97.90
Make a selection 964347009BXATK This steering rack is a remanufactured part with a core, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection and testing for structural integrity. We then disassemble and bead blast to remove corrosion. Internals are micro-finished to OEM specifications. Sealing surfaces are carefully checked and restored prior to installing new premium seals and o-rings. Each unit is then carefully tested for full functional...(choose a part on the right to read more)
$1,633.50
Make a selection 96434732202EQ The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and proactively change them when noticing any of the symptoms. Sold individually. Left or right side fitment. 2 necessary per car.
$49.50
Make a selection 99919501104 The hazet 450-n wrenches are the German made wrenches found in Porsche 356 a and b model tool kits. After an exhaustive search we have finally found these hard to find, sought after wrenches. Now is the time to get your tool kit up to concours standards. General Fitment356 1950-59356 1960-65
$22.00
Make a selection 96433102100RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 99911342641EQ High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$30.80
Make a selection 99919501106 The hazet 450-n wrenches are the German made wrenches found in Porsche 356 a and b model tool kits. After an exhaustive search we have finally found these hard to find, sought after wrenches. Now is the time to get your tool kit up to concours standards. General Fitment356 1950-59356 1960-65
$14.26
Make a selection ACCC107095 This unique tool has been designed to measure the end play movement of the vw crankshaft without the use of a dial indicator. All that is necessary is a feeler gauge set and this tool. With the tool bolted to the end of the case, the feeler gauge measures the gap created by the end play. The taking of this end play measurement is necessary whenever a vw engine is rebuilt to prevent the rear main bearing from seizing up. A must for rebuilding one engine or many, this tool works on all air-cooled vw engines and Porsche 912 & 914 models. Imperative when installing a new flywheel, to recheck and set the rear end play! General Fitment356 1950-59356 1960-65 912 1965-69 914 1970-76
$35.00
Make a selection
$995.00
Make a selection BES99715040S2 Quiet version with catalytic bypass and 4x80mm end tips these versions of FVD sport exhaust system is specifically made for increased performance vehicles. Designed for tolerable, pleasant and sonorous sound (especially for the turbo cabriolet). The elimination of the catalysts reduced drastically the back pressure and increases the performance and throttle response to the max! - stainless steel exhaust system - catalytic bypass - 4x80mm end tips - 2 3/4 tubing (70mm) straight through design for maximum power - weighs 39 lbs. (18,1 kg) - made in Germany - dme programming necessary (catalytic adaption) - stock tips will fit. Tech tip: order also repair / gasket set FVD mk9 970 02
$2,928.20
Make a selection BK10006 Powered by a tubocharged flat six, the 956/962 had Porsche’s first full monocoque structure and was the first car its engineers designed to produce aerodynamic downforce. Raced both by the factory and by private teams, these were turn-key cars: just turn the key.and win. These are among the world’s most respected racing cars. In these pages an expert on Porsche, karl ludvigsen, shares rare images from his personal archive and describes the highs and more highs of these great Porsches. General FitmentACCESSORY
$32.95
Make a selection FVD123013ATK K-16/24 turbo (up to 555 hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbochar...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123041ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |